Par Led elation 180 and Elidy-S

[Pace514]

Hello !!!

Wandering if Par Led elation 180 and Elidy-S is part of the library of LXconsole?

Thanks in advance!


Pace

[admin]

There are no Elation products in the LXConsole library. However, the sub channel configuration can easily be added and exported for use in your own library. If there is sufficient interest in specific Elation products, it is possible that they could be added in future versions.

[Pace514]

And wath about etc par led?

[Pace514]

WATH IS SUB CHANEL CONFIGURATION?

[admin]

There will be a channel setup for a ColorSource PAR in the library of the next build of LXConsole.

There is a key entry for ColorSource PAR in the "etc" key in LXBeams' key library. Any channel setup can be exported from LXBeams by selecting a symbol (insure that a dimmer is assigned) and choose File->Share->Channel Data... Save the .lxchannel file. Then, when you open the channel setup sheet in LXConsole, click the Import button and at the bottom of the list, select "Choose File..." and open the file you just created.

[admin]

The sub channel configuration is roughly equivalent to the DMX chart which shows the order of DMX addresses for an automated fixture. You access this by right-clicking a channel in the main display (or hold the control key down and click). You can then select "Setup Channel" from the menu that pops up. Alternatively, you can select a channel and choose Channel->Setup Hilited Channels...

The channel setup sheet has a list of sub channels on the left side. To setup a channel for an Elation Par 180, you would add sub channels for red,green, blue, amber and white to correspond to its simplest DMX mode.