Hello Claude, I am very happy with the operation of LxConsole, but I would like to know how to configure it to work with the Enttec Usb Pro (and how to configure it) so that everything goes smoothly and smoothly.
Thank you for your attention.
A greeting.
Josechu Puerta
Config LxConsole and Enttec
By default LXConsole will use the D2XX driver for the DMX USB Pro. The latest versions of MacOS include a virtual com port driver for the FTDI chip used by the DMX USB Pro. These drivers override the D2XX driver unless you install the D2XX Helper available from FTDI. If you want to use the Apple driver, you need to select the connection from the popup in LXConsole's Preferences->DMX Info tab. With the DMX USB Pro plugged in, select the virtual com port (which will begin with "cu.usbserial" followed by the serial number of the device). If you've installed D2XX Helper, you can check that D2XX is selected in the DMX USB Connection popup. (If you have a MkII version device, be sure to select it in the API popup as well.)
Once you've configured the API and connection, to enable output from USB, switch to the DMX Out tab and switch USB on "On".
Once you've configured the API and connection, to enable output from USB, switch to the DMX Out tab and switch USB on "On".