Hi Claude !!!
It seems that every time I'm making inhibitives, I am end up with frozened channels.
Here is the file:
https://www.dropbox.com/s/8tva02dr3cio8 ... xcues?dl=0
As you can see, channels 18>26 (Â group3) reacte as if they were under inhibitives control, which is not the case.
Note that inhibitives refered only to channels 1>6.
I have try hard to find what it could be but just can not figure it out !
Thank a lot !
Pascal
Channels frozened
It appears that all the subs are inhibitive. And, those channels are marked at zero in all the subs. Meaning that they will never come on.
If you need to control them with an inhibitive sub, they should be at full in the sub. If a sub does not want to control a channel, it should be unmarked.
You can unmark channels in a sub by looking at the sub in "subs" view mode. Select the channels to unmark. Choose Channel->Unmark Selected.
If you need to control them with an inhibitive sub, they should be at full in the sub. If a sub does not want to control a channel, it should be unmarked.
You can unmark channels in a sub by looking at the sub in "subs" view mode. Select the channels to unmark. Choose Channel->Unmark Selected.