Me & my grumpy subs don't get along.
Posted: Sun Nov 20, 2016 8:21 pm
I've made subs for the colour-channels in some of my ledlights and the intention was to use them from a nanoctrl but I must have done something wrong.
Ive put the subs on the small rotary knobs on top of the nano controller like ”CC-16” with action: ” SUB-3006” and so on, for all the little rotary knobs.
But I cant mix colours very well with them since they go from 0-100 immediately without any fade in between.
I figured it might have to do with the concept of ”Marked channels” so I tried changing my subs so that all the channels and sub channels where unmarked, but with the levels for the chosen colour still left at 100%.
Whenever I used the ”unmark all” command chose to unmark every single subchannel.
That gave me the surprising result that they midi controllers chosen knobs stopped working at all and stayed on zero no matter what I sent from the Nanoctrl.
So then I tried unmarking just one at a time with the option to unmark selected channels with the more confusing result that some channels actually started working as I had hoped but some didn´t.
So now I have a group of 13 lamps in which a few fade their colours nicely at the same time as the rest jump from 0-100 with no fading.
It seems to have something to do with whether I output that midi at full when I register a change in the sub channels marked status or not…
I can´t figure out what Ive done wrong´, so I repeat my mistakes randomly till I get fed up.
But at least my guess that it has something to do with the marking of channels to do seems to be a good one. That’s somewhat comforting.
Just wish I could figure out in what way I’m doing wrong and how to get rid of the problem for all my 9 little colour-subs.
Ive put the subs on the small rotary knobs on top of the nano controller like ”CC-16” with action: ” SUB-3006” and so on, for all the little rotary knobs.
But I cant mix colours very well with them since they go from 0-100 immediately without any fade in between.
I figured it might have to do with the concept of ”Marked channels” so I tried changing my subs so that all the channels and sub channels where unmarked, but with the levels for the chosen colour still left at 100%.
Whenever I used the ”unmark all” command chose to unmark every single subchannel.
That gave me the surprising result that they midi controllers chosen knobs stopped working at all and stayed on zero no matter what I sent from the Nanoctrl.
So then I tried unmarking just one at a time with the option to unmark selected channels with the more confusing result that some channels actually started working as I had hoped but some didn´t.
So now I have a group of 13 lamps in which a few fade their colours nicely at the same time as the rest jump from 0-100 with no fading.
It seems to have something to do with whether I output that midi at full when I register a change in the sub channels marked status or not…
I can´t figure out what Ive done wrong´, so I repeat my mistakes randomly till I get fed up.
But at least my guess that it has something to do with the marking of channels to do seems to be a good one. That’s somewhat comforting.
Just wish I could figure out in what way I’m doing wrong and how to get rid of the problem for all my 9 little colour-subs.