Hi everyone.
I have a Lxconsole used with Enttec pro and a Pc wing of chamsys used with Magic Q.
I would like to link them in a way to use both with the same dmx line and control the submastes manually in Chamsys. Meanwhile I can keep lx console linked with Qlab.
Is there anyone who knows how to link this two lighting sytems?
My very best[/list]
multiple lighgting console in a dmx line
It sounds like you want to merge the two DMX output streams. There are devices that will take two or more DMX inputs and combine them into a single output. You can find some by searching Google for something like "DMX Merger"
LXConsole is able to output Art-Net. If your other controller is also able to output Art-Net or sACN, you could use a network-to-dmx interface instead. Many of these are able to merge two or more network sources into a single DMX output.
LXConsole is able to output Art-Net. If your other controller is also able to output Art-Net or sACN, you could use a network-to-dmx interface instead. Many of these are able to merge two or more network sources into a single DMX output.